Velotric error code list · Velotric
EA9 Error on Velotric
What it means + how to fix it From the brand
Quick answer
EA9 on the Velotric (Discover, Nomad, Summit, Fold, Breeze, Triker, T1, GoMad, Tempo) means “Discharge Short Circuit Protection.” Most likely cause: damaged wiring in the motor cable, the motor or the controller. Try this first: switch off and remove the battery.
Try this first
Free, and each takes under 5 minutes.
In plain English
The controller has detected a short circuit in the motor or in the controller itself. Don't keep switching it on to test it. Look over the wiring for obvious damage, then leave the repair to a shop.
Step-by-step checklist
Work from the top. Steps go from free and easy to shop jobs. Switch the bike off before touching any connector. Tick each step as you go. Your progress is saved on this device.
Parts you might need
As an Amazon Associate I earn from qualifying purchases. These links go straight to Amazon.
Only buy a part if the free steps didn't fix it. Always match the voltage and connector type to your bike.
- Match your bike's model first. Ask a shop if unsure.
Motor extension cable
Replaces a damaged section of motor cable. Must match your connector and pin count.
- View on Amazon
Spiral cable wrap
Protects cables where they rub or bend near the handlebar and axle.
Still not fixed?
Pages to try next:
When it's time for a shop: if you've worked through every step and the problem is still there, take the bike to an e-bike shop. Bring your notes on when it happens, plus the code.
Words on this page: Controller