Error 000B0 on Talaria xXx (2025)

In plain English

The battery has its own management system that watches every cell, its temperature and its charging. This code means it found a problem inside the battery. Some of these clear after a restart, but a code that stays needs a dealer. Never open the battery.

Work from the top. Steps go from free and easy to shop jobs. Switch the bike off before touching any connector. Tick each step as you go. Your progress is saved on this device.

1. 1Switch off and restartFree Turn the bike off with its key or power switch, wait 30 seconds, then turn it back on. If the code clears, note what you were doing when it appeared, in case it comes back.
2. 2Check the outside of the battery (don't open it)Free Look at the battery case only. If it's swollen, cracked, leaking, very hot or smells, don't ride or charge it, move it away from anything flammable if it's safe to, and contact your dealer. If it smokes, get everyone out and call 911.
3. 3Write down the code and when it happensFree Take a photo of the display and note when the code appears: at switch-on, under hard acceleration, on climbs, in rain or while charging. Your dealer will ask for this.
4. 4Contact an authorized dealerShop job If the code stays after these checks, stop riding and contact an authorized dealer for your brand. The battery, motor, controller and high-voltage wiring are for trained technicians only. Don't open them or unplug high-voltage connectors.