Talaria Sting Pro (MX5, 2024) error code list · Talaria Sting Pro (MX5)

E50 Error on Talaria Sting Pro (MX5)

What it means + how to fix it From the manual

Quick answer

E50 on the Talaria Sting Pro (MX5) means “Vehicle locking error.” Most likely cause: the bike's lock or its location (electronic fence) settings are stopping it. Try this first: check the bike isn't locked.

Try this first

Free, and each takes under 5 minutes.

Check the bike isn't locked
Switch off and restart

In plain English

Talaria's manual links this code to the bike's lock and its electronic fence (location) settings. If your bike uses Talaria's app, check it isn't locked there. Otherwise contact your dealer.

Step-by-step checklist

Work from the top. Steps go from free and easy to shop jobs. Switch the bike off before touching any connector. Tick each step as you go. Your progress is saved on this device.

1Check the bike isn't lockedFree If your bike is set up in Talaria's app, check it isn't locked and that its location settings aren't stopping it. Then restart the bike.
2Switch off and restartFree Turn the bike off with its key or power switch, wait 30 seconds, then turn it back on. If the code clears, note what you were doing when it appeared, in case it comes back.
3Contact an authorized dealerShop job If the code stays after these checks, stop riding and contact an authorized dealer for your brand. The battery, motor, controller and high-voltage wiring are for trained technicians only. Don't open them or unplug high-voltage connectors.

Still not fixed?

Pages to try next:

All Talaria Sting Pro (MX5) codes

When it's time for a shop: if you've worked through every step and the problem is still there, contact an authorized dealer for your brand. Bring your notes on when it happens, plus the code.

Words on this page: Controller