SW900 code list · SW900 Display
Error 1 on SW900 Display
What it means + how to fix it From the manual
Quick answer
Error 1 on the SW900 means “Save.” This is a normal mode, not a fault. To clear it: turn it off and on again.
The SW900 manual lists code 1 as "Save" and describes no fault for it.
Try this first
Free, and each takes under 5 minutes.
In plain English
The code list marks this number as reserved or gives it no fault meaning. You may never see it. If it appears and stays on, write down exactly when it happens and check your bike's own manual, because sellers sometimes change these tables.
Step-by-step checklist
Work from the top. Steps go from free and easy to shop jobs. Switch the bike off before touching any connector. Tick each step as you go. Your progress is saved on this device.
Parts you might need
As an Amazon Associate I earn from qualifying purchases. These links go straight to Amazon.
Only buy a part if the free steps didn't fix it. Always match the voltage and connector type to your bike.
- Link coming soon
Electrical contact cleaner spray
Cleans dirt and corrosion from connector pins and battery contacts.
Still not fixed?
Pages to try next:
When it's time for a shop: if you've worked through every step and the problem is still there, take the bike to an e-bike shop. Bring your notes on when it happens, plus the code.
Words on this page: Controller