Segway KickScooter P65 error codes · Segway P65

Error 41 on Segway P65

What it means + how to fix it From the manual

Quick answer

Error 41 on the Segway KickScooter P65 means “Direction indicators abnormality.” Most likely cause: a fault in a light (headlight, tail light or turn signal) or its wiring. Try this first: switch the lights off and on.

Try this first

Free, and each takes under 5 minutes.

Switch the lights off and on
Switch off and restart

In plain English

The scooter found a problem in a light circuit. Switch the lights off and on, and contact support if the code stays.

Step-by-step checklist

Work from the top. Steps go from free and easy to shop jobs. Switch the scooter off before touching any connector. Tick each step as you go. Your progress is saved on this device.

1Switch the lights off and onFree Turn the lights off and back on, then restart the scooter. Check the lights aren't cracked or full of water.
2Switch off and restartFree Turn the scooter off, wait 30 seconds, then turn it back on. If the code clears, note what you were doing when it appeared, in case it comes back.
3Contact support or a service centerShop job If the code stays after these checks, stop riding and contact the brand's customer support or an authorized service center. Don't open the deck, battery, controller or motor: most scooter batteries and controllers aren't user-serviceable.

Still not fixed?

Pages to try next:

When it's time for a shop: if you've worked through every step and the problem is still there, contact the brand's support or an authorized service center. Bring your notes on when it happens, plus the code.

Words on this page: Controller