Ride1Up error codes (Roadster V3, Vorsa) · Ride1Up Roadster V3 and Vorsa
Error 14 on Ride1Up Roadster V3 and Vorsa
What it means + how to fix it From the brand
Quick answer
Error 14 on the Ride1Up Roadster V3 / Vorsa means “Failure of the temperature of the motor.” Most likely cause: a long climb, a heavy load or hard riding. Try this first: switch off and let it cool.
Ride1Up's definition: the motor has reached its maximum temperature.
Try this first
Free, and each takes under 5 minutes.
In plain English
The motor has reached its maximum safe temperature, and the system has cut power to protect it. After a long or hard ride, letting it cool is the fix. If it happens without much riding, something is wrong and a shop should check it.
Step-by-step checklist
Work from the top. Steps go from free and easy to shop jobs. Switch the bike off before touching any connector. Tick each step as you go. Your progress is saved on this device.
Parts you might need
As an Amazon Associate I earn from qualifying purchases. These links go straight to Amazon.
Only buy a part if the free steps didn't fix it. Always match the voltage and connector type to your bike.
- View on Amazon
Floor pump with gauge
Soft tires make the motor work harder and cost range.
Still not fixed?
Pages to try next:
- How to Set Your E-Bike Tire Pressure
- How to Stop a Disc Brake Rubbing
- All Ride1Up Roadster V3 / Vorsa codes
- Cuts out on hills
When it's time for a shop: if you've worked through every step and the problem is still there, take the bike to an e-bike shop. Bring your notes on when it happens, plus the code.
Words on this page: Controller