Monthly E-Bike Maintenance Checklist

In plain English

Most e-bike breakdowns start as something small you can spot early: a soft tire, thin pads, a dry chain, a loose bolt or a corroded plug. A monthly check catches them before they leave you stranded.

Work from the top. Steps go from free and easy to shop jobs. Switch the bike off before touching any connector. Tick each step as you go. Your progress is saved on this device.

1. 1Check the tire pressureFree Use a pump with a gauge. Pump to a pressure within the range printed on the tire's sidewall.
2. 2Check the tires for wearFree Look for flat tread, cuts, cracks or things stuck in the tread.
3. 3Check the brakesFree Squeeze each lever: firm, not touching the bar. Check how much pad material is left.
4. 4Check and lube the chainFree Wipe it, add a drop of lube to each link, wipe off the extra. Check for wear every few months.
5. 5Check bolts and spokesFree Check the axles, stem, handlebars, pedals and saddle are tight. Squeeze the spokes for loose ones.
6. 6Check the battery and connectorsFree Check the battery contacts are clean and it clicks in firmly. Look at the visible plugs for dirt or corrosion.
7. 7Check the lightsFree Switch the lights on and check both work.

Parts you might need

As an Amazon Associate I earn from qualifying purchases. These links go straight to Amazon.

Only buy a part if the free steps didn't fix it. Always match the voltage and connector type to your bike.

• Floor pump with gauge

  Soft tires make the motor work harder and cost range.

  Link coming soon

• Chain lube

  Keeps the chain quiet and stops wear. Use bike chain lube, not household oil.

  Link coming soon

• Bike multi-tool or hex key set

  Fits nearly every bolt on a bike. Useful for almost every guide here.

  Link coming soon

• Chain wear checker

  A small gauge that tells you when a chain is worn out.

  Link coming soon