Bosch Intuvia (BUI255) error codes, 2024 manual with ABS codes · Bosch Intuvia (2024, with ABS)

Error 592 on Bosch Intuvia (2024, with ABS)

What it means + how to fix it From the manual

Quick answer

Error 592 on the Bosch Intuvia (BUI255), 2024 manual with ABS codes means “Incompatible component.” Most likely cause: a battery, charger or other part that isn't designed for this system. Try this first: turn it off and on again.

Try this first

Free, and each takes under 5 minutes.

Turn it off and on again

In plain English

The system found a part it isn't made to work with, such as a different battery, charger or display. Only use parts your bike maker or the system brand lists for your bike. A dealer can confirm which parts fit.

Step-by-step checklist

Work from the top. Steps go from free and easy to shop jobs. Switch the bike off before touching any connector. Tick each step as you go. Your progress is saved on this device.

1Turn it off and on againFree Switch the display off, wait 30 seconds, then switch it back on. If the code clears, note what you were doing when it appeared, in case it comes back.
2Did you just change a part?Moderate Displays, controllers and batteries must be a compatible match (the same communication protocol), not just share a plug. If the problem started right after you replaced something, put the old part back or check compatibility with the seller.
3Ask a dealer which parts fitShop job A dealer for your bike's system can check the part numbers and fit a compatible part.

Still not fixed?

Pages to try next:

All Bosch Intuvia (BUI255), 2024 manual with ABS codes codes

When it's time for a shop: if you've worked through every step and the problem is still there, take the bike to an e-bike shop. Bring your notes on when it happens, plus the code.

Words on this page: Controller