Bafang DP C244.CAN / C245.CAN code list · Bafang DPC-244 / DPC-245 Display

Error 47 on Bafang DPC-244 / DPC-245 Display

What it means + how to fix it From the manual

Quick answer

Error 47 on the Bafang DPC-244 / DPC-245 means “SOC of the battery is too high.” Most likely cause: the battery or charger reporting an over-full charge. Try this first: unplug the charger.

Try this first

Free, and each takes under 5 minutes.

  1. Unplug the charger
  2. Turn it off and on again

In plain English

The battery reports that its state of charge is too high. Unplug the charger. If the code keeps coming back, have the battery and charger checked by a shop.

Step-by-step checklist

Work from the top. Steps go from free and easy to shop jobs. Switch the bike off before touching any connector. Tick each step as you go. Your progress is saved on this device.

Parts you might need

As an Amazon Associate I earn from qualifying purchases. These links go straight to Amazon.

Only buy a part if the free steps didn't fix it. Always match the voltage and connector type to your bike.

  • Replacement e-bike charger

    Only if your charger is faulty. Must match your battery's voltage and plug type exactly.

    Match your bike's model first. Ask a shop if unsure.

Still not fixed?

Pages to try next:

When it's time for a shop: if you've worked through every step and the problem is still there, take the bike to an e-bike shop. Bring your notes on when it happens, plus the code.