Aventon error code list (Level 3, Aventure 3, Abound SR, Abound LR) · Aventon Level 3 / Aventure 3 / Abound

Error 48 on Aventon Level 3 / Aventure 3 / Abound

What it means + how to fix it From the manual

Quick answer

Error 48 on the Aventon Level 3, Aventure 3, Abound SR and Abound LR means “Turn light fault.” Most likely cause: a fault in a light (headlight or tail light) or its wiring. Try this first: turn it off and on again.

Try this first

Free, and each takes under 5 minutes.

  1. Turn it off and on again

In plain English

The system found a problem in a light circuit, such as a broken wire, a short or a failed light. Check the light wiring first. If the code stays, a shop can test the light and controller.

Step-by-step checklist

Work from the top. Steps go from free and easy to shop jobs. Switch the bike off before touching any connector. Tick each step as you go. Your progress is saved on this device.

Parts you might need

As an Amazon Associate I earn from qualifying purchases. These links go straight to Amazon.

Only buy a part if the free steps didn't fix it. Always match the voltage and connector type to your bike.

  • Rechargeable tail light (USB)

    A self-powered tail light that needs no wiring. To replace a built-in tail light instead, match the light voltage your bike supplies.

    View on Amazon
  • Rechargeable bike light set (USB)

    The simplest fix if your built-in light has died: a self-powered light that needs no wiring. To replace the built-in light instead, match the voltage your controller supplies (your manual lists it).

    View on Amazon

Still not fixed?

Pages to try next:

When it's time for a shop: if you've worked through every step and the problem is still there, take the bike to an e-bike shop. Bring your notes on when it happens, plus the code.